moray42
Merman
Had this thing sitting around for a couple years now, so time to part with it finally.
Bought in spring of 2012, but ridden sparingly since I had been putting more ride time on the other bike. By November I picked up a new bike. This one has been sitting back in the original box since.
26" fork came as a 140mm and then had a travel spacer installed to drop it to 120mm. Install done by Beacon Cycling in Northfield. Steerer is cut to 9-3/8", so there is plenty left to remove the star nut and recut. 1-1/8" straight steerer.
Standard quick release. There is the normal chipping of the paint you'd expect from removing/installing the wheel. Checked around and no go on the quick release.
There is a small nic/scratch on one of the lower legs near the wiper. Will get pics and measurements later.
Pretty firm at $100 mainly just because it is a few years old.
[GALLERY=media, 44]IMG_0078 by moray42 posted Mar 18, 2015 at 9:45 AM[/GALLERY]
[GALLERY=media, 45]IMG_0079 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 48]IMG_0082 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 47]IMG_0081 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 46]IMG_0080 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 51]IMG_0085 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 50]IMG_0084 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 49]IMG_0083 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
Bought in spring of 2012, but ridden sparingly since I had been putting more ride time on the other bike. By November I picked up a new bike. This one has been sitting back in the original box since.
26" fork came as a 140mm and then had a travel spacer installed to drop it to 120mm. Install done by Beacon Cycling in Northfield. Steerer is cut to 9-3/8", so there is plenty left to remove the star nut and recut. 1-1/8" straight steerer.
Standard quick release. There is the normal chipping of the paint you'd expect from removing/installing the wheel. Checked around and no go on the quick release.
There is a small nic/scratch on one of the lower legs near the wiper. Will get pics and measurements later.
Pretty firm at $100 mainly just because it is a few years old.
[GALLERY=media, 44]IMG_0078 by moray42 posted Mar 18, 2015 at 9:45 AM[/GALLERY]
[GALLERY=media, 45]IMG_0079 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 48]IMG_0082 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 47]IMG_0081 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 46]IMG_0080 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 51]IMG_0085 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 50]IMG_0084 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
[GALLERY=media, 49]IMG_0083 by moray42 posted Mar 18, 2015 at 9:47 AM[/GALLERY]
Last edited:
