carvegybe
Well-Known Member
Hello Folks
I tried to sell this in Nov 2021, but didn't attract a price at which it made sense for me to sell: https://www.mtbnj.com/forum/threads...sale-with-power-meter-and-dumb-trainer.53122/
So instead I used the bike and the trainer since then, and made some upgrades too (e.g. grips, tires, etc).
But now I'm running out of room so cutting the price in half to $999, which includes the entire combo set out below.
Pickup in West Windsor / Princeton Junction area (Mercer County).
Overall condition / remarks:
Bike is in a ready-to-ride condition and excellent mechanical condition. It has some minor scratches but the photo of the bottom of the downtube shows the bike is in good shape. It has been a very good bike for me. It’s only downsides are:
* - Item has been replaced from original and is in almost new condition
Geometry (XL Size)
I tried to sell this in Nov 2021, but didn't attract a price at which it made sense for me to sell: https://www.mtbnj.com/forum/threads...sale-with-power-meter-and-dumb-trainer.53122/
So instead I used the bike and the trainer since then, and made some upgrades too (e.g. grips, tires, etc).
But now I'm running out of room so cutting the price in half to $999, which includes the entire combo set out below.
Pickup in West Windsor / Princeton Junction area (Mercer County).
Combo Summary
- Merida One-Twenty XT Edition 29’ – 2018 Model
- Saris Fluid2 Trainer with adapters to fit bike for easy install
- Quality Wheels WTB ST i23 TCS Disc Rear Wheel for using bike on trainer, including:
- Shimano XT Brake Rotor
- Michelin Dynamic Classic 23 x 622 slick tire (almost new condition)
- Shimano SLX CS-M7000 cassette 11-46, 11-speed
Overall condition / remarks:
Bike is in a ready-to-ride condition and excellent mechanical condition. It has some minor scratches but the photo of the bottom of the downtube shows the bike is in good shape. It has been a very good bike for me. It’s only downsides are:
- Outdated geometry (which makes it a very good climber)
- 2-by drivetrain
- Make not known in the USA (it appears that Merida owns Specialized and the deal includes anti-compete clauses for the United States)
Bike Detail
* - Item has been replaced from original and is in almost new condition
| Bike Make/Type | Merida One-Twenty XT Edition 29’ – 2018 Model |
| Riding Type | Trail |
| Frame Size | XL |
| Frame Material | Aluminum (Prolite 66 triple butted aluminium, 6066, with internal cable routing) |
| Shock | 120mm FOX Performance Float |
| Fork | 130 mm RockShox Revelation RC (Boost) |
| Headset | Merida M2339 |
| Handlebar | Merida Expert CC, 740mm, 10mm rise |
| Grips | ESI chunky (bar ends included) |
| Stem* | Salsa Cycles 38mm |
| Brakes* | Shimano XT 2-piston with metallic brake pads |
| Rotors* | 2 x 180mm Ice-Tech Shimano XT (rear:RT-MT800 M, front: SM-RT86 M with centerlock adapter) |
| Drivetrain* | Full Shimano XT (except cassette) Cassette: 46-11 gearing, 11-speed Shimano SLX (CS-M7000) Front: and 26/36 front chainrings |
| Cranks | 175mm Shimano XT |
| Power Meter* | Stages 3rd generation left-only power meter (replaced original left crank) |
| Pedals | Shimano XT SPD |
| Chain* | KMC X11 |
| Rims* | DT Swiss M1900 with DT Swiss Hubs (both centerlock) |
| Tires* | Pirelli Scorpion Trail, tubeless setup |
| Saddle* | WTB Rocket ~140mm (Medium) |
| Seatpost | Merida Expert Dropper, 31.6 mm diameter |
| Rear Dropout / Hub Dimensions | 12mm x 148mm (thru axle) - BOOST |
| Bottle Cage Mounts | One |
| Weight | 31.9 lbs (as shown on photos) |
Geometry (XL Size)
| Top Tube Length | 642 mm |
| Head Tube Angle | 69.0 degrees |
| Head Tube Length | 115 mm |
| Seat Tube Angle | 75.0 degrees |
| Seat Tube Length | 550 mm |
| Bottom Bracket Height | 40mm drop |
| Chainstay Length | 445 mm |
| Wheelbase | 1191 mm |
| Standover | 796 mm |
| Reach | 471 mm |
| Stack | 633 mm |
Attachments
Last edited:
