Robson
Well-Known Member
Anyone have any experience with this particular model? I like the specs on it but I'm not crazy about the color...https://www.specialized.com/us/en/stumpjumper-evo-pro/p/199752?color=320262-199752
2022 Specialized Stumpjumper EVO Pro
- Thread starter Robson
- Start date
Robson
Well-Known Member
Jim, do you have S3 size?
a.s.
Mr. Chainring
Do it! Do it!!
I do, if he doesn't.
Steve Vai
Endurance Guy: Tolerates most of us.
2 of them. And an Expert as well.
Robson
Well-Known Member
Where is your shop and are you open on Saturday?
Steve Vai
Endurance Guy: Tolerates most of us.
Hilltop in Summit. Yessir.
Robson
Well-Known Member
Steve Vai
Endurance Guy: Tolerates most of us.
I'm off Saturday but you can talk to Dennis. He's the man.
Cafe Dave
Well-Known Member
A couple resources to help dial in your new bike:
1.https://www.specialized.com/us/en/suspension-calculator/app
Note - 2022 SJ EVO is not listed yet, so use the published shock settings for the 2021 model then subtract 20 psi from rear shock numbers, Should get you ballpark.
2.https://www.specialized.com/us/en/stumpjumper-evo-geometry/app?
Experiment with settings. I've tried lower BB, steeper HA and other combinations and found the default 40mm BB Height and neutral 64.5 HA worked best for most of the trails I ride. Chunky ups and downs.
the only changes I made for for the S3, was change to 40mm (from 50) stem, 780 carbon bar, (might go 760) WTB Volt saddle and Minions DHFs all around. (Didn't want to wait for the DHRs. Maybe next time)
I'm still tweaking the fork settings, but the cold weather makes the fork way too stiff. Need to change compression settings at least.
No complaints. Love it. Good luck!
1.https://www.specialized.com/us/en/suspension-calculator/app
Note - 2022 SJ EVO is not listed yet, so use the published shock settings for the 2021 model then subtract 20 psi from rear shock numbers, Should get you ballpark.
2.https://www.specialized.com/us/en/stumpjumper-evo-geometry/app?
Experiment with settings. I've tried lower BB, steeper HA and other combinations and found the default 40mm BB Height and neutral 64.5 HA worked best for most of the trails I ride. Chunky ups and downs.
the only changes I made for for the S3, was change to 40mm (from 50) stem, 780 carbon bar, (might go 760) WTB Volt saddle and Minions DHFs all around. (Didn't want to wait for the DHRs. Maybe next time)
I'm still tweaking the fork settings, but the cold weather makes the fork way too stiff. Need to change compression settings at least.
No complaints. Love it. Good luck!
Last edited: