Parts bin clean out (some free, some for $)

robcleary

robcleary

Well-Known Member
Hi all, got some spare parts and bits that I've acquired over the years. Would like to clean out the parts bin a bit. Ideally I can meet up at a trailhead anywhere within an hour of Camden County, or I can ship at buyer's $.


PXL_20240621_200534258.jpg
A pair of Donnelly MXP CX tires. 700x33, tubes only. I was given these by a generous forum member for a CX race last year. Haven't used them since. - Free Pending


PXL_20240621_200610357.jpgPXL_20240621_200619005.jpg

Selcof Zeta 6061 aluminum seatpost taken off my gravel bike. 27.2 x 350mm. As you can see it's quite scratched up, but not from poor fitment. The bike it was on is steel and it had a little bit of surface rust forming, so I sanded it off. Appears to be fine otherwise. - Free


PXL_20240621_200648785.jpgPXL_20240621_200653163.jpg



San Marco Monza Start wide saddle, 277x141mm. Carbon steel rails supposedly, 258g. Came on my gravel bike, I'm closer to a 145 width saddle so never worked for me.
- $10 Pending


PXL_20240621_200728604.jpgPXL_20240621_200743164.jpg

Bontrager Arvada Elite, austenite rails, 270x138mm width, 224g. Came on my Top Fuel, immediately didn't like it (way too narrow for me). Basically new. - $20 Sold


PXL_20240621_200848005.jpgPXL_20240621_200852803.jpg



Maxxis DHF 27.5 2.5", 3c, Maxx Terra, EXO. It's pretty used, but might have some life for someone who doesn't mind. No cuts or plugs. -Free Pending
 

Attachments

  • PXL_20240621_200648785.jpg
    PXL_20240621_200648785.jpg
    165.3 KB · Views: 26
Last edited:
PXL_20240621_200905705.jpgPXL_20240621_200924076.jpg

Maxxis Aggressor 27.5 x 2.5", EXO TR. Also has been well used, but has some life. Also no cuts or plugs. - Free Pending


Last but not least, I have a 2010 Marin Hawk Hill 26" hardtail that needs to goooo. My garage is already stuffed, so if anyone wants a 26" hardtail to build for their kiddo or knows of a bike co-op that has space, lmk. I know Boys & Girls club up in Trenton is an option but last I've heard they're stuffed with donations right now lol. It's got two wheelsets (both tubes), QR skewer hubs, and a RockShox Silver TK Air fork. Deore hydraulic brakes, although the drivetrain needs some work. I have a Box 11 on there right now but the chainline doesn't line up with the 3x - to - 1x converted cranks, so ideally some standard QR spaced cranks would fix this thing right up.

Note: this is an old picture so some parts are not on here anymore (saddle, pedals).

Pending
PXL_20230416_211751759.jpg
Pe
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom