Pay it Forward

This is Ongoing and will be updated. Here is what I have so far:


Silver K2 XC flatbar 25.4
Black Kalloy 1 1/8" stem 135mm X 5* rise
K2 silver 90mm x 15* stem 1 1/8"
Azonic polished Shorty DH stem 40mm 7* rise.. Needs a bit of work sterrer tube work....
Coda Polished crank arms 175mm compact 94 BCD
New Tektro Cruiser V brakes. no cables or housings
Titec Berserker DH saddle (seen better days)
WTB Laser DH saddle (seen better days)
Intense Mag30 26" rim.. Has hops (flat spots)

check back often and I'll update more things...


Added parts.
 
Yakima parts

Rainy day- good time to clean out the garage.

To a good home I have:
4 Yakima rain-gutter style towers- about 7 years old, but in great shape
Cable lock- loops through the bike and is locked by the SKS locks on the towers.
2 Crossbars cut at 42" and 43" respectively- some corrosion inside tubes, but outside is fine, and I'm sure they're solid if they fit your ride..

All you need is a set of SKS locksets, some endcaps and racks, and you're in business.
To see if this fits your ride, go to Yakima.com and go through the Fit My Car steps.
If it calls for Raingutter towers and bars < 42", you're all set.

Can meet in northern Bergen Co, at Ringwood or Jungle when the rain stops.

Since this could save someone a couple hundred or so, I'll ask that whoever takes them make a donation to MTBNJ *if they can*.
 
Last edited:
2 Handlebar mount bike LED lights by Planet Cycle. They have rechargeable batteries in them.

They aren't good enough for any sort of real night riding but are fine for being seen and seeing a short distance ahead of you.

Nashbar gel saddle cover. I have no idea where I got this but it's new/clean.

A few cheap sets of flat platforms.

Located in Whippany/Morristown
 
Ritchey Pro road/cross wheels. Both rim brake tracks are fairly worn but still have some miles in them. Wheels are true and never needed truing. The rear wheel freehub is about to give up the ghost, but if someone can source one it seems like an easy enough fix. Horse, mouth, etc.

You come pick them up.
 
wheels

looking for a backup for CX bike and something to have a set of road tires on also. Would love to check these out. Where are you? Guessing I can replace the hub too. I'm in Monmouth County near Asbury but ride all over.
 
looking for a backup for CX bike and something to have a set of road tires on also. Would love to check these out. Where are you? Guessing I can replace the hub too. I'm in Monmouth County near Asbury but ride all over.

Lebanon. Round Valley is close enough for me.
 
Shimano M122 SPD's size 47 but fit like a 46. The right shoe's rubber is ripping away from the plastic. Probably good for a first timer.Theres only a few months left on these haha😀
 

Attachments

  • 001.jpg
    001.jpg
    357.3 KB · Views: 57
Free

-2 pairs of MTN shoes. Sidi (SPOKEN FOR) & Nike. Both size 44. Used but have plenty of life left in them.
-Fox knee pads.
-Road bar & Ultegra 9 speed shifters. Rear shifter is sticky but still shifts. (SPOKEN FOR)
-Miscellaneous lights. Batteries are bad but you can get them working if you buy/make them. 4 light/bulb units. (SPOKEN FOR)

PM me if you want any of them.

So the Nike shoes & pads are still available.
 

Attachments

  • bike sale 2 008.jpg
    bike sale 2 008.jpg
    218.3 KB · Views: 55
  • bike sale 2 012.jpg
    bike sale 2 012.jpg
    343.4 KB · Views: 66
  • bike sale 2 013.jpg
    bike sale 2 013.jpg
    319.1 KB · Views: 76
  • 757791.jpg
    757791.jpg
    237.4 KB · Views: 67
Last edited:
Pumps

I have some blackburn on frame pumps.
a Mammoth air and mountain air. If anyone needs it pm me

Also will have some more stuff later.
 
looking for 44T ring and longer chain

Looking for a couple of big rings. Anyone ditched the 44T ring and have no use for it. Looking to make the 26" SS more road/leisure ride friendly for family and a used longer chain with life left to bump up from 32T to 44T. Also need the other 44T ring to replace a really worn one on girlfriends dads hybrid 26" 9speed

Please let me know. Thanks
 
I know it was a while ago but are these still available?
Coda Polished crank arms

What I am looking for:
- a spider (5-hole preferred) but I'll take crank arms w spider too.
- rigid fork with (I think) 1 1/8" (28mm) tapered threadless tube; 7.5" minimum
- if anybody has any single-speed sprockets & chainrings to give away, trade or sell cheap let me know.

Giving away (in Clinton NJ):
- OLD&dirty shimano 7-speed cassette (the rings seem to be riveted together)
- small rings from a newer 8-speed cassette (I am keeping the bigger rings for my cheap single-speed conversion)
- 1997 Rock Shox Judy XC with blown dampener
- circa 1994 18" Steel frame (Cignal Zanzibar) purple as can be. Includes fork, handlebar, BB
- some sort of MTB race saddle I used once and gave up
 
Back
Top Bottom